Ricoh MP 7503SP Field Service Manual page 624

4. Replacement and Adjustment
Potential sensor replacement
Potential sensor replacement
Print margins
622
Item SP No.
2962 After replacement, do SP3901 to confirm
that auto process control is on and
operating, and then do SP2962 to execute
process control manually for the new sensor.
This SP2962 executes only if SP3901 is on
(enabled).
3901 After replacement, check this SP code and
confirm auto process control is on and
operating.
2101 Do this SP to adjust the margins (erase, blank
space) at the top, bottom, and sides of the
paper.
Function