SW 101
ON
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
ON
ON
ON
*1: The entrance mode disregards paper size. Skew correction is performed at the scanning roller.
ADF Skew Correction
If the skew with A4 SEF paper is more than 0.5/200 mm in the main scan direction, you can adjust the
position of the ADF hinge [A] or adjust the appropriate SP codes below.
6006* ADF Registration Adjustment
001
ADF Horizontal Registration (Front)
Adjusts the side-to-side registration for the front in ADF mode.
[–3 to +3/0.1 mm]
002
ADF Horizontal Registration (Back)
Adjusts the side-to-side registration for the back in ADF mode.
[–3 to +3/0.1 mm]
Free run (Entrance mode *1, simplex, no registration)
Free run (Entrance mode, simplex, continuous scanning)
Motor test (feed, transport, exit motors)
Copy Image Adjustments: Printing/Scanning
Operation Mode
991