Notes For Energy Save Mode Setting; Ip Address Setting - Ricoh MP 7503SP Field Service Manual

2. Installation
No.
1 Green and Yellow
2 Green
3 Yellow

Notes for Energy Save Mode Setting

If the machine which has this option enters into the Energy Save Mode, you cannot print because this
will cause a communication error. Follow the procedure below to disable the Energy Save Mode
function.
1. Press [Features Settings] on the operation panel.
2. Press [Administrator Tools] in [System Settings].
3. Press [Energy Saver Mode to Disable Print Server].
4. Press [Disable Mode].
5. Press [OK].
6. Press [Features Settings].

IP Address Setting

This section describes how to set an IP address for this option manually.
You can set an IP address which is not only on the same network segment, but also on a different
network segment to share a single printer with devices in multiple networks.
398
LED Color
1000BASE-T
10BASE-T
100BASE-TX
Indicates:
This section is deleted
RTB 24