Ricoh MP 7503SP Field Service Manual page 414

2. Installation
• If the machine returns the "Failed" alert, check if the SD card to determine if it has already
been used.
• Turn off the machine and then steps 1 to 5 again.
6. Cycle the machine off/on.
7. Go in the SP mode and do SP5-878-004 (Option Setup: OCR) and then press [EXECUTE]. The
OCR dictionary is copied to the HDD from the SD card.
• In the first execution, the SD card and the machine are linked.
• In the second execution, the OCR dictionary is copied onto the HDD.
8. Turn off the machine, and then remove the SD card.
• Store the SD card in a safe location.
• You will need the original SD card in case the HDD unit ever fails.
9. Turn on the main power switch.
10. On the "Scanner" screen touch [Send File Type / Name].
11. Check to see if [OCR Settings] is displayed on the [Send File Type / Name] screen.
412