Exposure Glass - Ricoh MP 7503SP Field Service Manual

4. Replacement and Adjustment
27. Lay the scanner unit on a flat, clean surface.
Reassembly
1. When you re-attach the PCB cover plate [A], first set the tabs on the rail below. Make sure each
tab is engaged with the rail.
2. When you re-attach the rear, upper cover [B], make sure the I/F cables are in the knockouts [1]
and that the top edge of the cover is under the rear edge [2].

Exposure Glass

1. Prepare a clean, flat location to lay the exposure glass.
2. Raise the ADF.
516