• The searchable PDF function can be switched on/off on the [OCR Settings] screen after
installing the OCR unit.
• If you want to use the searchable PDF function, select [On] for [OCR Settings]. (Default: [Off])
Restoration
After installation of the OCR Unit:
• The searchable PDF function is saved on the HDD and the SD card ID is saved in NVRAM.
• After replacement of either the HDD unit or the NVRAM, OCR Unit Type M2 must be installed
again.
When the original SD card exists
• If you replace the HDD.
Re-install the OCR Unit Type M2 from the original SD card.
• If you replace the NVRAM.
If you upload / download the NVRAM data, re-install the OCR Unit Type M2 from the original SD
card. If you don't upload / download the NVRAM data, order a new SD card (service part) of the
OCR Unit Type M2. Then re-install the OCR Unit Type M2 from the new SD card.
• When you replace the HDD and NVRAM at the same time.
Re-install the OCR Unit Type M2 from the original SD card.
If Original SD Card is Lost
• Order a new SD card (service part) of the OCR Unit Type M2, and then re-install from the new SD
card.
OCR Type M13
413