Using Auxiliary Trays - Ricoh MP 7503SP Field Service Manual

Finishers SR4120/SR4130 (D3CG/D3CH)
3. Set the trays in the holder.

Using Auxiliary Trays

The trailing edges of excessively curled or Z-folded paper can activate the tray full sensors before the
tray is actually full. Once this occurs and the "Exit Tray Full" message appears, the job stops and cannot
continue until some sheets are removed from the tray which is only partially full. The auxiliary trays,
number [1], [2], and [3] on their undersides are designed to prevent this problem.
263