Controller Board Nvram - Ricoh MP 7503SP Field Service Manual

4. Replacement and Adjustment

Controller Board NVRAM

1. Locate the SMC printout from the factory provided with the main machine.
2. Do SP5990-001 (All – Data List) to print out all the current machine settings.
3. Turn the machine off.
4. Remove the SD slot cover, insert an SD card into Slot 2 (the lower slot), and then turn the machine
on.
5. Do SP5824 (NVRAM Data Upload) to copy the NVRAM data onto the SD card.
6. Turn the machine off and unplug the machine from the power source.
7. Remove the SD card from SD Card Slot 2.
8. Insert another SD card into SD Card Slot 2, reconnect the machine to the power source, and then
turn the machine on.
9. Do SP5846-051 (UCS Settings) to copy all address book data from NVRAM to the SD card.
10. If the fax option is installed, go into the User Tools and make a note of the following settings:
• F Code Box List: Fax Initial Setting > Main Setting > F Code Box Setting: List Print > Print
866