Copy Connector Type M25(D3D3)
With this option you can connect two machines to perform simultaneous copying for the same job.
Accessories
Check the accessories and their quantities against this list:
No.
1. PCB D3D3
2. LAN Cable
Installation
• Before doing this procedure, turn the machine off and disconnect its power cord from the power
source.
• Before you handle the boards, touch a metal surface to discharge accumulated static charge from
your hands. A static discharge could damage the boards.
• Handle the boards carefully to avoid damaging them.
1. Remove the cover [A] from the right I/F slot (marked "Tandem").
Description
Copy Connector Type M25(D3D3)
Q'ty
2
1
361