Related Sc Codes - Ricoh MP 7503SP Field Service Manual

Related SC Codes

One of two SC codes is issued if the sensor fails.
SC869-01 Human detection (proximity) sensor failure: Error 1.
The sensor remained on for over 24 hours.
• Cycling the machine off/on does not cancel this error.
• When this error occurs the machine enters sensor failure mode and ignores subsequent input from
the sensor.
• Even though the sensor is on, the machine does not enter Pre-recovery mode, and the Engine Off
timer setting is not affected and continues to operate normally.
• To cancel the error, switch off the sensor with the User Tool setting described above.
• The sensor and its components require replacement.
SC869-02 Human detection (proximity) sensor failure: Error 2
The sensor remained off, even after the operator performed 20 actions with the machine operation
panel, opening and closing the front door, ADF, etc. The machine will issue this error code after every
20 events in operation of the machine.
• Cycling the machine off/on does not cancel this error.
• To cancel the error, switch off the sensor with the User Tool setting described above.
• The sensor and its components require replacement.
Related SP Code
There is one human detection sensor related SP code: SP5102-203 Auto Detect: Human Detection
Sensor Check. This is an on/off check.
• Enter "0" to switch the sensor off.
• Enter "1" to switch the sensor on.
This SP is used to check the operation of the sensor. It confirms that the sensor can be switched off and
on normally. (Default: On). This check can be used regardless of the User Tool setting. Even if the sensor
is switched off with the User Tool setting, a check can be done with this SP code.
Operation Panel
This machine employs the Smart Operation Panel. For more details, refer to the "Smart Operation Panel
2nd Generation" field service manual.
New Features
1165