4. Replacement and Adjustment
[1]
Pick-up roller
[2]
Feed roller
[3]
Separation (reverse) roller
6. Remove each roller and replace it.
• During replacement, try to avoid touching the surfaces of the rollers with bare hands.
• The FRR mechanisms for Tray 1 (tandem tray), Tray 2, Tray 3 (universal trays), By-Pass Tray,
and ADF are similar, but the rollers are interchangeable only between Trays 1,2,3 (not By-
Pass, ADF).
By-Pass Separation Roller Pressure Adjustment
The position of the drive gear of the separation roller can be changed to adjust the amount of pressure
exerted by the separation roller. This adjustment can be done:
828