Ricoh MP 7503SP Field Service Manual page 1189

5. The machine will prompt you "Please Wait" as the firmware update program boots. This requires
about 35 sec.
6. Wait for the version update screen to appear.
If the SD card contains more than one software application, the screen will be almost the same as
the one below. The screen below shows that the SC card contains two applications: "Engine" and
"Printer".
7. To select the item for upgrade, touch the selection on the touch panel, or push the corresponding
key on the 10-key pad (1 to 5) of the operation panel. The number in parentheses tells you which
key to push. When you make a selection, the [Verify(./*)] and [Update(#)] buttons come on the
screen.
• If you push [Exit] (or the [0] key), you go back to the usual operation screen.
• Push the [Start] key on the operation panel to select and download all the options shown on
the screen.
• Push the [Clear] key on the operation panel if you want to cancel your selections and make
new ones.
• "ROM": This is the number and other version information of the ROM firmware installed in the
machine at this time.
• "NEW": This is the number and other version information of the firmware on the SD card.
8. With the selected items shown in reverse color, push the [Update] button or the [#] key on the
operation panel to start the update.
After you push [Update]:
Firmware Update
1187