By-Pass Motor - Ricoh MP 7503SP Field Service Manual

4. Replacement and Adjustment
2. After you have re-installed the bypass unit and re-connected the motor and sensors, check this
sensor to the right and make sure that it is securely connected.
3. Work carefully to avoid catching any harnesses on the unit while moving it.
4. After re-installing the bypass unit, make sure no harnesses are pinched between the bypass unit
and the frame.

By-Pass Motor

1. Remove the by-pass unit. By-pass Unit Removal
2. The by-pass motor is on the back of the by-pass unit.
840