Maintenance and servicing
5.9
Side broom (B400 RM/RH only)
5.9.1
Changing the side broom
1
Fig. 57
1
Button Pre-sweep suction unit
2
Locking pin
3
Side broom with optional Dust Stop
4
Hub with hole
Inspect the side broom once per week and replace if wear is present.
1. Park the machine on a level surface.
2. Turn the machine off and remove the key.
3. Unlock and remove the locking pin Fig. 57-2 located underneath the
broom.
4. Remove the side broom Fig. 57-3 downwards.
5. Fit the new side broom onto the hub Fig. 57-4.
6. Insert the locking pin underneath the broom into the hole in the hub and
lock it.
142
2
3
4
Scrubmaster B400 R (7190)