Table of Contents
Advertisement
3.1.c - Assembling the brush (Fig. 5)
-
Position the brush (1) on the ground.
-
Lift the front of the machine up by lever-
ing the handle (2) and remove the poly-
styrene support (3).
-
Position the flange (4) above the brush
(1).
-
Press the button (5) that illuminates,
then, for starting the rotation of the brush,
press the levers (6) until hearing the
coupling "Click" of the attachment of the
brush, then release levers (6) and press
the button (5) and the light turns off.
WARNING:
Use only brushes provided by
the manufacturer according to
the model of the machine.
Using other types of brushes
may compromise the safety of
the machine.
4.1 CHARGING THE
BATTERY (Fig. 6)
DANGER:
Charge the batteries in well-
ventilated areas which comply
with standards in force in the
country of use.
For safety-related information,
follow what is described in
chapter 1 of this manual.
WARNING:
For information and warnings
about the battery and the bat-
tery charger, follow what is de-
scribed in the battery and bat-
tery charger manual enclosed
with this document.
6
Fig. 5
EN-13
EN
4
4
2
5
6
3
1
Advertisement
Table of Contents
