Rotating Brush Unit; Changing The Rotating Brushes/Pads - HAKO Scrubmaster B400 R Operating Manual

Maintenance and servicing
5.6

Rotating brush unit

4
Fig. 50
1 Rotating brush unit
2 Indicator
3 Indicator marking
4 Rotating brushes
5.6.1

Changing the rotating brushes/pads

Attention
If the rotating brushes/pads are not fitted, there is a risk of material
damage to the machine and ground.
Using the indicator Fig. 50-2 on the right side of the machine, it is possible to:
• Determine the wear of the rotating brushes/pads (the rotating brush unit
must be lowered)
• Determine whether the rotating brushes/pads have been fitted
The rotating brushes/pads Fig. 50-4 must be changed at the latest when the
indicator Fig. 50-3 is in the red zone.
Note
If no rotating brushes/pads are fitted, the top edge of the display
plate is outside the coloured area.
132
1
2
1
3
2
Scrubmaster B400 R (7190)