Battery; Checking The Charging State - HAKO Scrubmaster B400 R Operating Manual

5.2

Battery

5.2.1

Checking the charging state

Fig. 33
The charge condition of the battery Fig. 33-2 is displayed on the multifunction
display during operation. Depending on the charge condition, the following
symbols appear:
Symbols Charging state
Battery is fully
charged
Battery capacity is
displayed in steps of
10 %
to
Battery capacity less
than 10 %
Battery is empty
BMS service infor-
mation. A four-digit
service code
appears at the same
time Fig. 33-1.
Scrubmaster B400 R (7190)
Maintenance and servicing
Notes
Battery can be charged
Cleaning functions are switched off
after 3 minutes.
Charge the battery!
Cleaning functions will be switched
off.
Only travel at half speed is possible.
Battery must be fully charged
immediately!
Service information, see section 3.6
Service information on page 97.
1
2
60 %
111