Switching Off Suction / Waste Water Tank Full - HAKO Scrubmaster B175 R Series Manual

2.2 Brief description

2.2.1 Switching off suction / waste water tank full

Suction is switched off by the operator via the tip switch or automatically in case of the
signal "waste water tank full" to protect the suction turbine.
Switching off by the operator:
•
The squeegee is raised.
•
The suction motor switches off with a delay (15 seconds).
Switching off because the tank is full:
The suction motors are shut off when the waste water tank is full via float switch S04,
which is connected to the machine control unit A01:X15.4 and A01:X15.16.
Sheet 15