4 Parts Replacement
4.13 Replacing Take-up Section
This section describes the procedure to replace the take-up section.
4.13.1 Removing Take-up Cover
NOTE
Lower the release lever to the FREE side before removing the take-up cover.
1. Remove the screws (pan-head machine screw M3
1
2
2. Detach the lever from the release cam.
1
Rev.-00
×
8: 2 pieces) that retain the rubber foot.
1
2
4-140
VJ-1604 Maintenance Manual
No.
Part name
1
Rubber foot
2
Screws that retain the rubber
foot
No.
Part name
1
Release cam
2
Lever