Replacing Cr_Hp Sensor, Lever Sensor - MUTOH ValueJet VJ-1604 Maintenance Manual

4 Parts Replacement

4.13.4 Replacing CR_HP Sensor, Lever Sensor

(1) Replacing W_ON Sensor Relay Assembly, W_OFF Sensor Relay Assembly
NOTE
Remove the screws that retains the board chassis before replacing W_ON sensor relay assembly or
W_OFF sensor relay assembly.
"(1) Removing Board Chassis" p.4-143
1. Remove the cable of the W_ON sensor relay assembly and W_OFF sensor relay assembly from the
connector to the VJ take-up CNT board assembly.
2
2. Detach the W_ON sensor relay assembly and the W_OFF sensor relay assembly from the CR_HP sensor
and the lever sensor.
2
3. Replace the W_ON sensor relay assembly and W_OFF sensor relay assembly
4. To reassemble the unit, reverse the removal procedure.
Rev.-00
1
1
4-150
VJ-1604 Maintenance Manual
No. Part name
1 VJ take-up CNT board assembly
2 Cable of W_ON sensor relay
assembly and W_OFF sensor
relay assembly
No. Part name
1 CR_HP sensor, lever sensor
2 W_ON sensor relay assembly,
W_OFF sensor relay assembly