Removing Front Cover And Replacing Front Cover Holder - MUTOH ValueJet VJ-1324 Maintenance Manual

3.2 Removing Covers
3.2.4 Removing Front Cover and Replacing Front Cover
Holder
1. Open Front Cover.
2. Remove front cover by pulling it toward the direction of the arrow shown below.
No.
1 Front cover
2 Front cover holder
3. Unhook and remove the front cover holder by pushing it toward the direction of the arrow shown
below and remove.
1
2
No.
1 Front cover holder

3.2.4 Removing Front Cover and Replacing Front Cover Holder

1
2
Name
Name
No.
2 Front cover holder hook
4. Replace front cover holder.
NOTE
Do not remove front cover by force. It may damage or deform the resin.
5. To reassemble unit, reverse the removal procedure.
VJ1324E-M-02
Name
P.3-13