Replacing Cr Return Pulley Assy, Cr Belt Rj13Assy - MUTOH ValueJet VJ-1324 Maintenance Manual

3.6 Replacing CR Driving Section Components
3.6.8

Replacing CR Return Pulley Assy, CR Belt RJ13Assy

T I P
Replacing Procedure For Maintenance Part:CR Return Pulley, CR Belt RJ13 Assy.
This part will be referred to as the CR Return Pulley, CR Belt in this manual.
1. Remove I/H Cover.
"3.2.1 Removing I/H Cover" p.3-7
2. Remove Side Cover R.
"3.2.2 Remove Side Cover R" p.3-8
3. Remove Side Cover L.
"3.2.3 Removing Side Cover L and Replacing Maintenance Cover Holder" p.3-11
4. Remove Top Cover.
"3.2.6 Removing Top Cover" p.3-16
5. Move the Carriage to the opposite side of origin.
"3.7.1 How To Release Carriage Lock" p.3-98
Loosen the screw (1 piece) for adjusting CR belt tension on the origin, and loosen
6.
CR belt tension.
No.
1 CRbelt
2 pan-head small screw
3.6.8 Replacing CR Return Pulley Assy, CR Belt RJ13Assy
1
Name
M4 × 35
Remove CR belt from CR motor Assy pulley.
7.
2
No.
1
CR Motor Assy Pulley
2
CR Belt
Remove CR return pulley from CR return pulley base.
8.
i) Shift CR return pulley toward the direction of A shown below.
ii) Shift CR return pulley toward the direction of B shown below.
1
2
2
No.
1
CR return pulley
2 CR return pulley shaft
3
CR return pulley base
VJ1324E-M-02
1
Name
3
A
B
Name
P.3-95