3.7 Replacing Carriage Peripherals
13. While opening the upper tab of cutter holder Assy (next figure A), push out cutter solenoid Assy
with a flat head screwdriver shaft, etc. from the bottom of cutter holder Assy to remove it.
1
3
No.
1
Solenoid Assy
2
Tab of Cutter Holder
3
Screwdriver,etc.
14. Remove Cutter Solenoid Cable Assy from Cutter Solenoid Assy.
2
1
No.
1
Cable of Cutter Solenoid Assy
2
Connecting Point of Cutter Solenoid Assy and Cutter Solenoid Cable
Assy
3.7.15 Replacing Cutter Solenoid Assy, Cutter Solenoid Spring Assy
2
Name
Name
15. Replace Cutter Solenoid Assy.
16. To reassemble unit, reverse the removal procedure.
VJ1324E-M-02
P.3-134