Replacing Pressure Roller Arm Assy - MUTOH ValueJet VJ-1324 Maintenance Manual

3.6 Replacing CR Driving Section Components
3.6.9

Replacing Pressure roller Arm Assy

This section describes Pressure Roller Assy, Pressure Roller Axis Assy, Pressure Roller Spring and
Presure Arm Assy.
(1) Replacing Pressure roller Spring
1. Remove Paper Guide R2.
"3.2.7 Removing Paper Guide R2" p.3-17
2. Remove the pressure Roller spring using longnose pliers, etc.
1
No.
1
Pressure Roller Arm Assy
2 Pressure Roller Spring
3. Replace Pressure Roller Spring.
4. To reassemble the unit, reverse the removal procedure.
(2) Replace Pressure Roller Arm Assy
1. Remove Pressure Arm Spring Assy (2 pieces) retaining Pressure Roller Arm Assy.
"(1) Replacing Pressure roller Spring" p.3-97
2. Remove Pressure Roller Arm Assy.
3.6.9 Replacing Pressure roller Arm Assy
2
Name
3. Remove Pressure Roller Assy from removed Pressure Roller Arm Assy.
1
No.
1 Pressure Roller Arm Assy
2 Pressure Roller Assy
4. Replace Pressure Roller Arm Assy.
5. To reassemble the unit, reverse the removal procedure.
NOTE
If the upper spring comes off, attach it from the front side
(3) Pressure Roller Assy、 Pressure Roller Axis Assy
Refer to Exploded View for Components of Pressure Roller Assy、 Pressure Roller Axis Assy.
Exploded View
pressure Roller spring
1. Remove (2 pieces） .
"(1) Replacing Pressure roller Spring" p.3-97
2. Remove Pressure Roller Assy and Pressure Roller Axis Assy from Pressure Roller Arm Assy.
"(2) Replace Pressure Roller Arm Assy" p.3-97
3. Replace Pressure Roller Assy and Pressure Roller Axis Assy.
4. To reassemble the unit, reverse the removal procedure.
VJ1324E-M-02
2
Name
P.3-97