Pf Motor Assy Endurance Menu - MUTOH ValueJet VJ-1324 Maintenance Manual

5.12 Endurance Running Menu
5.12.2

PF Motor Assy Endurance Menu

This menu is used to perform media feeding operation to perform the endurance running of PF motor
Assy .
The available settings are shown below.
Set item Contents
Media feed amount Set the media feed
amount per endurance
running cycle.
Number of endurance Set the number of
running cycles endurance running
cycles.
T I P
• The following table shows the motor transfer parameters to media feed amount.
Speed
Acceleration
Deceleration
• If the number of endurance running cycles is set to -1, the PF motor Assy continuously repeats
endurance running until cancel input is given from Operation panel.
• The maximum counter value for endurance running cycles is 99999999 (up to 8-digit number).
If the number of cycles exceeds the maximum value, the counter displays 99999999.

5.12.2 PF Motor Assy Endurance Menu

Set value Remark
0.1 to 100 Unit: mm
-1 to 10000 -
35cps
0.1G
0.1G
[Enter]
[Cancel]
[Enter]
Enter a media feed amount by using ±.
Range : 0.1mm to 100.0 mm
[Cancel]
[Enter]
Endurance Count
[Enter]
Performing endurance
[Enter] or [Cancel]
VJ1324E-M-02
P.5-73