Uni-D/Bi-D Adjustment Menu - MUTOH ValueJet VJ-1324 Maintenance Manual

5.7 Adjustment Menu
5.7.6

Uni-D/Bi-D Adjustment Menu

This menu is used to adjust the gap of the nozzle rows and perform the print position of the bi-
directional printing.
• For the gap of the nozzle rows, check the printing results of the Uni-D adjustment check
patterns and adjust the gaps.
• For the print position of the bi-directional printing, check the printing results of the Bi-D
adjustment check patterns and adjust the positions.
T I P
• Uni-D (Uni-Direction) indicates uni-directional printing.
• Bi-D (Bi-Direction) indicates bi-directional printing.
• Because of the Print head specification, only one adjustment value corresponds to all
nozzle rows.
• The cps (Characters Per Second) is the unit of printing speed.
The menu items of Uni-D/Bi-D are as follows.
Item
Uni-D 320 VSD1 Uni-D Adjustment confirmation pattern of 320cps, VSD1, and PG LOW/HIGH
value
Uni-D 320 VSD3 Uni-D Adjustment confirmation pattern of 320cps, VSD3, and PG LOW/HIGH
value
Uni-D 320 VSD4 Uni-D Adjustment confirmation pattern of 320cps, VSD4, and PG LOW/HIGH
value
Uni-D 400 VSD1 Uni-D Adjustment confirmation pattern of400cps, VSD1, and PG LOW/HIGH
value
Uni-D 400 VSD3 Uni-D Adjustment confirmation pattern of 400cps, VSD3, and PG LOW/HIGH
value
Uni-D 400 VSD4 Uni-D Adjustment confirmation pattern of 400cps, VSD4, and PG LOW/HIGH
value
Bi-D 320 VSD1 Bi-D Adjustment confirmation pattern of 320cps, VSD1, and PG LOW/HIGH
value
Bi-D 320 VSD3 Bi-D Adjustment confirmation pattern of 320cps, VSD3, and PG LOW/HIGH
value

5.7.6 Uni-D/Bi-D Adjustment Menu

Contents
Item
Bi-D 320 VSD4 Bi-D Adjustment confirmation pattern of 320cps, VSD4, and PG LOW/HIGH
value
Bi-D 400 VSD1 Bi-D Adjustment confirmation pattern of 400cps, VSD1, and PG LOW/HIGH
value
Bi-D 400 VSD3 Bi-D Adjustment confirmation pattern of 400cps, VSD3, and PG LOW/HIGH
value
Bi-D 400 VSD4 Bi-D Adjustment confirmation pattern of 400cps, VSD3, and PG LOW/HIGH
value
Bi-D ALL Adjust all Bi-D pattern.
Item
Set up Parameters setup for the items selected as shown on the left.
Print Prints out the patterns of the items selected on the left, with the
(Only when Uni-D is selected) current parameters.
Print 1 Prints out the patterns of the items selected on the left, with the
(Only when Bi-D is selected)
current parameters and the parameters with ± 2, ± 4, ± 6, and ±
8 (1 vertical line in turn, with each parameters). Check the current
amount of misalignment.
Print 2 Prints out the patterns of the items selected on the left, with the
(Only when Bi-D is selected) current parameters.
Print3 Prints all Bi-D pattern in current parameter.
(Only when Bi-D ALL is
selected)
To adjust the Uni-D/Bi-D, follow the procedure below.
(1) Set media as necessary.
(2) The printer prints the adjustment check patterns.
Uni-D adjustment → (2-a） → (2-e)
Bi-D adjustment → (2-b） → (2-c) → (2-e)
VJ1324E-M-02
Contents
Contents
P.5-42