Paperinitial Menu - MUTOH ValueJet VJ-1324 Maintenance Manual

5.15 PaperInitial Menu

5.15 PaperInitial Menu
This menu is used to set the media detection.
The default value is the same as that of the normal operation mode (chart mode).
Select either Top & Width, Width, or Off. When Off is selected, you can set the media width in the
media width setting menu.
The available settings are shown below.
Items
Top & Width
Width
Off
[Enter]
or
[Cancel]
When setting
5.14.3 Heater Menu
Contents
Normal media detection mode
Detects media width.
Does not detect media.
OFF
Input media width
Change the value (unit to count) by pressing
[setting/value+] or [setting/value-] key.
210mm to 1371mm
VJ1324E-M-02
P.5-86