Diagnostic Functions With The Cpx-Mmi; Error Display (Menu [Diagnostics] ) - Festo CPX-CMAX Description

6 Diagnostics and error handling
6.5

Diagnostic functions with the CPX-MMI

Parameterisation and commissioning via FMT or CPX-MMI is not supported. Representa­
tion of the CMAX corresponds thereby to that of an I/O module. The subsequently de­
scribed basic information is available.
General information on operating and commissioning the CPX terminal with the operator
unit CPX-MMI-1 è Description for the operator unit, P.BE.CPX-MMI-1-....
6.5.1

Error display (menu [Diagnostics] )

Modules which report an error are marked in the main menu by an exclamation mark (!) in front of the
module number. In the menu [Diagnostics], errors present are displayed as input channel errors.
System Overview
CPX terminal
0: ... Module ...
1: ... Module ...
! 2: CMAX-C1-1 1 Serð
3: ... Module ...
_____________________________________________________
ßà
Diag
1
1
Error present
2
Menu [Diagnostics]
Fig. 6.3 Error display with the CPX-MMI
Errors of the CMAX cannot be acknowledged with the CPX-MMI.
Festo – P.BE-CPX-CMAX-SYS-EN – en 2017-09b – English
_
2:CMAX-C1-1
Monitoring/forcing (M)
Diagnostics (D)
Parameters (P)
Module data (MD)
OK
_____________________________________________________
Back
_ 2:CMAX-C1-1 :D
Channel fault:
2
Ch 0: Input
Configuration error
______________________________________________________
OK Back
3
Error number and description
_
3
ßà
87