Quasonix TIMTER Installation And Operation Manual page 68

Mnemonic Name
Command
RFOR RF Off on
Retune
RFS RF Output State
61 Quasonix, Inc.
Description
Specifies whether RF should be
turned off during a frequency
retune (even if the new frequency
is in the same band)
RF will always be turned off
during a retune if the frequency
requires a hardware band
change.
Examples:
RFOR Show current setting
RFOR 0 Disable RF Off on
Retune
RFOR 1 Enable RF Off on
Retune
Displays information used to
determine whether RF and
modulation are actually On in the
format
RFS chan
Chan = An optional channel
parameter used to override the
current channel for display
information
Valid channels are 1, 2, or 3 (to
display both)
Example:
RFS 2
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard Y
Factory
Default
RFOR 1