Quasonix TIMTER Installation And Operation Manual page 60

Mnemonic Name
Command
MA Modes Allowed
MJ Modulation
Scaling Step
Size
53 Quasonix, Inc.
Description
Reports the modes (modulations)
enabled on the transmitter, as
determined by the part number
Example:
MA Show available modes
0 - PCMFM
1 - SOQPSK
2 - MHCPM
3 - BPSK
4 - QPSK
5 - AQPSK
6 - Carrier Only
7 - OQPSK
8 - UQPSK
9 - AUQPSK
13 – STC
14 – DPM
Sets the current modulation
scaling factor used when the
single key Power Step Up and
Power Step Down functions are
used
Valid range is .0009 to 10.01
Examples:
MJ Report the current scaling
factor
MJ 5 Set the scaling factor to 5
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard N/A
MS Y
Factory
Default
N/A
MJ 1.5