Quasonix TIMTER Installation And Operation Manual page 75

Mnemonic Name
Command
TXBR Dual Transmitter
Baud Rate
UN User Notes
VE Software
Version
VF Variable FIFO
Depth
68 Quasonix, Inc.
Description
Temporarily changes system
baud rate; for odd baud rates
(non-standard) accuracy may
vary
Valid range is about 300 to 230,
400 baud – Not saved when the
transmitter is powered off
Examples:
TXBR Displays current system
baud rate
TXBR 200 Sets system
baud rate to 200
Sets or displays the user notes for
the current setup
UN [notes]
[notes] is up to 80 characters of
string data
Report the current Firmware
(software) version information for
the transmitter
Syntax:
VE – Displays current software
version of the transmitter
VE [a] – Displays ALL version
information including models,
revisions, software versions for
attached components
Sets the FIFO depth for
controlling latency time between
bits in and bits out
Valid range is 0 to 255
Example: VF 120 (120 = Variable
Power)
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard N
Standard
Standard N/A
VF Y
Factory
Default
N/A
N/A
VF 128