Quasonix TIMTER Installation And Operation Manual page 64

Mnemonic Name
Command
NG Machine Noise
Generator
OC Overtemperature
Control Enable
OTA Over-the-Air
Rate
PA PA HVA Voltage
and Current
PAT PA Attenuator
57 Quasonix, Inc.
Description
This is a read only command;
Displays machine noise registers
NG Displays machine noise
registers
Enables or disables
overtemperature power backoff
control
OC 0 Disable Overtemperature
Control
OC 1 Enable Overtemperature
Control
If the transmitter temperature
goes above the set limit stored on
the device and the current power
level is over 25, the transmitter
automatically starts to back off
power in 2 dB steps to a
maximum of 6 dB.
Displays the current baseband
and over-the-air bit rates on each
channel. This information is also
displayed on the RFS output.
OTA Display over-the-air rate
Displays the most recent PA HVA
voltage and current readings
PA Reports PA HVA voltage
and current
This is a read only command to
display the current attenuator
settings
PAT Reports PA attenuator
setting
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard Y
Standard
Factory
Default
OC 1