Quasonix TIMTER Installation And Operation Manual page 56

Mnemonic Name
Command
ID Internal Data
Gen
IMN Internal Model
Number
49 Quasonix, Inc.
Description
Report or set the internal data
pattern
This setting is used if the Clock
and Data Source is set to internal
(CS 1).
When setting the data, the ID
name must be PN6, PN9, PN11,
PN15, PN17, PN20, PN23, PN31,
MARK, SPACE, ALT01, a valid 4
digit hexadecimal value, or
USER. If USER, two or more
arguments may be included in
format:
ID USER pattern bitlen
Pattern = A 32 bit hex or binary
pattern
Bitlen = Number of bits (1-32) in
the user pattern
Examples:
ID Report the internal data
pattern
ID PN15 Set internal data
pattern to PN15
ID AA55 Set internal data
pattern to 0xAA55
ID 5555 16 Set pattern to 16
bit pattern of 5555h or bin
0101010101010101
In SOQPSK mode, ID 5555 or ID
AAAA will result in an
unmodulated carrier, at the
nominal carrier frequency.
Display the internal model
number for the transmitter
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
Standard Y
Standard
Factory
Default
ID PN15