Quasonix TIMTER Installation And Operation Manual page 58

Mnemonic Name
Command
LD LDPC Encoding
Enable
LHS LDPC Header
51 Quasonix, Inc.
Description
Enable, disable, or show the
current state of the Forward Error
Correction (FEC) / Low Density
Parity Check (LDPC) encoder
Valid options are 0 and 1
Examples:
LD Show the current encoder
state
LD 1 Enable the LDPC
encoder
LD 0 Disable the LDPC
encoder
Automatically disables differential
encoding; *PSK modes default to
DE enabled
Automatically re-enables DE for
SOQPSK mode
Refer to section 4.2.3.1.4 for
additional LD command detail
Selects the header to use with
Low Density Parity Check coding
on the unit
Examples:
LHS Show the current header
LHS 0 Set header to
SOQPSK/LDPC 0
Refer to section 4.2.3.1.5 for
additional LHS command detail
TIMTER™ Multi-mode Dual
Telemetry Transmitter
Option (s) Setting
Required Saved?
LD, LD6 Y
*PSK
modes
LD Y
Factory
Default
LD 0
LHS 0