Configuring Knx Functions - Jung Smart Visu Server Series Product Documentation

2.4.4 Configuring KNX functions

Successful commissioning of the KNX system and definition of the KNX-IP Gateway in SV-
Control are required to be able to use KNX functions.
Access as Administrator or User
The "User" and the "Administrator" can have different access rights to KNX functions
within the "Functions" column. The differentiated access rights for locked control boxes at
a glance:
Create new KNX functions
Edit the names of the KNX functions
Edit the icons of the KNX functions
Assign new existing KNX functions to new areas
Remove existing KNX functions from new areas
Edit the group address of the KNX functions
Permanently delete existing KNX functions
Each KNX function can be described by a specific function type and summarises suitable
ETS group addresses.
The following function types are available to the Administrator:
SV-SERVER-01 / SV-SERVER-INT
Access
Figure 19: Access rights to KNX functions
User
Areas &
KNX
Function
 
 
 
 
 
 
 
Administrator







28 / 157