Download Print this page
Jung Smart Visu Server Quick Start Manual
Jung Smart Visu Server Quick Start Manual

Jung Smart Visu Server Quick Start Manual

Hide thumbs Also See for Smart Visu Server:

Advertisement

Quick Links

Smart Visu Server
Quick Start Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Smart Visu Server and is the answer not in the manual?

Questions and answers

Summary of Contents for Jung Smart Visu Server

  • Page 1 Smart Visu Server Quick Start Guide...
  • Page 2 Content Philips HUE Sonos Astro function Remote access HOW DO I CONNECT PHILIPS HUE? HOW DO I CONNECT SONOS? HOW DO I ADJUST THE ASTRO FUNCTION? HOW DO I SET UP REMOTE ACCESS? Presence simulation Voice control Staircase function Email messaging HOW DO I SET UP THE PRESENCE HOW DO I CONNECT AMAZON ALEXA / HOW DO I SET UP A...
  • Page 3 Smart Visu Server How do I connect Philips Hue?
  • Page 4 SMART VISU SERVER + PHILIPS HUE 2 1. Introduction Feel-good lighting with the Smart Visu Server: With the integration of the Philips Hue colour lighting system, you simply create individual light scenes with your fi nger tip on your smart phone. In addition, it can be controlled with the JUNG KNX push-button modules.
  • Page 5 Create more rooms and allocate lamps Connect the Smart Visu Server to the IP network 10. Connect the Philips Hue Bridge to the Smart Visu Server Connect the Philips Hue lamps to the Smart Visu Server Edit Philips Hue lamps Configure actions 14.
  • Page 6 SMART VISU SERVER + PHILIPS HUE 4 3. Commissioning Philips Hue Install the Philips Hue App on your smartphone and integrate the Hue Bridge to your home network. 3.1 Initial operation For the initial operation, in normal circumstances there is no confi gured Hue Bridge present. The initial operation of the Philips Hue is carried out as follows: Open the app.
  • Page 7 SMART VISU SERVER + PHILIPS HUE 5 3.2 Light setup After you have connected the Bridge to the Hue app and you have accepted the terms of use, fi rst make the light and room setup. to add new lamps to the net-...
  • Page 8 SMART VISU SERVER + PHILIPS HUE 6 3.3 Room setup As soon as you have confi rmed the selected lamps, you come automatically to the room settings. Add your new rooms using +. Name your room and specify the Setting up the Philips Hue is ...
  • Page 9 SMART VISU SERVER + PHILIPS HUE 7 3.4 Setting brightness and colour You can now set the brightness and colour of the lamps for each room. Using the Home menu, select the Set the Brightness and the Colour desired room.
  • Page 10 SMART VISU SERVER + PHILIPS HUE 8 3.5 Adding additional lamps Check that all Philips Hue lamps are switched on. Select the Light setup. to add new lamps to the Select Search to open the network All accessible lamps are displayed in network.
  • Page 11 SMART VISU SERVER + PHILIPS HUE 9 3.6 Creating more rooms and allocating lamps Now you can create one or more rooms where there are Philips Hue lamps. Select the Room setup. Add your new room using +. Name your room and specify the The list displays all rooms created.
  • Page 12 SMART VISU SERVER + PHILIPS HUE 10 4. The Smart Visu Server The Smart Visu (SV) Server gives you the choice of two different areas on the start page: „ SV-Home: operation and visualisation „ SV-Control: editing and setting...
  • Page 13 SMART VISU SERVER + PHILIPS HUE 11 4.1 Functions of the Smart Visu Server On this page you get a short overview of the functions of the SV Server. On the following pages you will find out how to commission the SV Server, make lamp settings and how to create actions.
  • Page 14 SMART VISU SERVER + PHILIPS HUE 12 5. Commissioning Smart Visu Server After you have started operating the Philips Hue System, connect the Smart Visu (SV) Server to your home network. „ Call the SV Server in the web browser of your end device (PC, laptop, tablet).
  • Page 15 SMART VISU SERVER + PHILIPS HUE 13 5.1 Configuration of a Hue application – general configuration The following explains how to connect Philips Hue to the Smart Visu Server. The SV Server automatically recog- If the Bridge is not automatically...
  • Page 16 SMART VISU SERVER + PHILIPS HUE 14 5.2 Editing the Hue lamps You can now set the brightness and colours of your Hue lamps with the SV Server. Select your Hue lamp [1] under Areas Create a Room [2] under Areas �...
  • Page 17 SMART VISU SERVER + PHILIPS HUE 15 6. Hue system and actions The actions allow you to create scenes for the Hue system that are retrieved on a schedule, event or user basis. Two application examples are described. 6.1 “Good morning [Mo – Fr]” action This action switches the lighting for your room at a specified time.
  • Page 18 SMART VISU SERVER + PHILIPS HUE 16 6.2 “Goodbye” action This action is to switch off all Hue lamps when leaving the apartment by pressing a button. Create the action in the Actions tab, Specify which Status the functions After you have saved the action, it can...
  • Page 19 SMART VISU SERVER + PHILIPS HUE 17 7. Saving the project Congratulations – Philips Hue has now been connected to the Smart Visu Server in accordance with the installation example and is set up. Don’t forget to save your project data and activate access protection!
  • Page 20 Smart Visu Server How do I connect Sonos?
  • Page 21 SMART VISU SERVER + SONOS 2 1. Introduction Outstanding sound thanks to Sonos integration: JUNG integrates the WLAN-based Home Sound System from Sonos into the Smart Visu Server – conveniently controllable via smartphone or Alexa voice control and directly connected without a separate gateway.
  • Page 22 PAGE your JUNG Smart Visu Server Commissioning Sonos with just a few steps. Connect the Smart Visu Server to the IP network The table here gives an overview of Connect Sonos to Smart Visu Server the necessary steps. Connect loudspeaker to KNX rotary sensor...
  • Page 23 SMART VISU SERVER + SONOS 4 3. Commissioning Sonos Install the Sonos app (Android / iOS / Windows) on your smartphone, tablet or PC and then use the app to set up your Sonos devices. The following pages are based on the Sonos app for smartphones with Android operating system.
  • Page 24 SMART VISU SERVER + SONOS 5 3.1 My Sonos Using My Sonos in the Sonos app, you can set radio stations, tracks or playlists as favourites for your Sonos system. This is required for further commissioning and enables quick access to your favourite music.
  • Page 25 SMART VISU SERVER + SONOS 6 4. The Smart Visu Server The Smart Visu (SV) Server gives you the choice of two different areas on the start page:  SV-Home: operation and visualisation  SV-Control: editing and setting...
  • Page 26 SMART VISU SERVER + SONOS 7 4.1 Functions of the Smart Visu Server On this page you get a short overview of the functions of the SV-Server. On the following pages you will fi nd out how to commission the SV-Server, to create areas and functions and to create a presence simulation with actions and groups.
  • Page 27 SMART VISU SERVER + SONOS 8 5. SV-Server commissioning Integrate the Smart Visu (SV) Server in your home network.  Call the SV-Server via the web browser of your terminal device (PC, laptop, tablet). To do so, enter the address http://sv-server.local...
  • Page 28 SMART VISU SERVER + SONOS 9 5.1 KNX – general confi guration The individual steps for connecting your KNX system to the Smart Visu Server are explained below. Select the address of your IP interface Import the KNX group addresses of...
  • Page 29 SMART VISU SERVER + SONOS 10 5.2 Areas & functions You can now create and allocate rooms and create functions on the Areas and Functions tab. Note: The following is based on a configured system with already created functions and rooms.
  • Page 30 SMART VISU SERVER + SONOS 11 6. Prepare KNX and Sonos 6.1 Confi guration of the JUNG KNX Sonos Gateway with the Engineering Tool Software (ETS) Download the appropriate product databases for the JUNG KNX rotary sensor (DS 4092 TS) and the JUNG KNX push-button module...
  • Page 31 SMART VISU SERVER + SONOS 12 7. Connect Sonos to your Smart Visu Server Ensure that all loudspeakers are in the same network as your Smart Visu Server for a successful connection between KNX and Sonos. Your SV-Server automatically detects the available Sonos loudspeakers.
  • Page 32 SMART VISU SERVER + SONOS 13 7.2 Connect loudspeaker to KNX rotary sensor (step 1 of 2) The following steps help you with the set-up for controlling Sonos with the KNX rotary sensor. In the Properties, under Settings, select Create a function for the...
  • Page 33 SMART VISU SERVER + SONOS 14 7.2 Connect loudspeaker to KNX rotary sensor (step 2 of 2) Under Settings, enter the previously The list selection [2] on the right next to Now connect (couple) the KNX group created KNX group addresses for the...
  • Page 34 SMART VISU SERVER + SONOS 15 7.3 Connect loudspeaker to KNX push-button sensor (step 1 of 2) The following steps help you with the set-up for controlling Sonos with the KNX push-button sensor. Create a function for the KNX Select the function type...
  • Page 35 SMART VISU SERVER + SONOS 16 7.3 Connect loudspeaker to KNX push-button sensor (step 2 of 2) Switch back to the Sonos loudspeaker Now add the function Virtual Dimmer The picture shows the Sonos control in (Sonos Kitchen) [1]. KNX > Sonos Kitchen (push-button) SV-Home.
  • Page 36 SMART VISU SERVER + SONOS 17 8. “Party mode” action This action shows you how to combine multiple Sonos devices for a party across rooms and supply them from one music source. Create an individual multi-room experience for your party.
  • Page 37 SMART VISU SERVER + SONOS 18 9. Saving the project Congratulations – you now know how to connect and operate Sonos with your KNX installation via SV-Server without an additional gateway. Do not forget to backup your project data and activate the access protection!
  • Page 38 Smart Visu Server How do I adjust the astro function?
  • Page 39 SMART VISU SERVER + ASTRO FUNCTION 2 1. Introduction Automatically adjust the switching times to the sun positions in the course of the year with the JUNG Smart Visu Server: this is not a problem thanks to the astro function!
  • Page 40 The astro function can be integrated STEP PAGE into your JUNG Smart Visu Server with Connect the Smart Visu Server to the IP network just a few steps. Set up areas and functions The table here gives an overview of Input location coordinates for astro function the necessary steps.
  • Page 41 SMART VISU SERVER + ASTRO FUNCTION 4 3. The Smart Visu Server The Smart Visu (SV) Server gives you the choice between two different areas on the start page.  SV Home: operation and visualisation  SV Control: editing and setting...
  • Page 42 SMART VISU SERVER + ASTRO FUNCTION 5 3.1 Functions of the Smart Visu Server This page gives you a short overview of the functions of the SV Server. On the following pages you will fi nd out how to commission the SV Server and how to create ares, functions and actions.
  • Page 43 SMART VISU SERVER + ASTRO FUNCTION 6 4. Commissioning Smart Visu Server Integrate the Smart Visu (SV) Server in your home network.  Call the SV Server via the web browser of your terminal device (PC, laptop, tablet). To do so, enter the address http://sv-server.local or the IP address of the SV Server allocated by the router.
  • Page 44 SMART VISU SERVER + ASTRO FUNCTION 7 4.1 Create areas and functions After you have established the connection to the KNX bus, you now create areas and functions in the SV Server. Note: The following is based on a confi gured system with already created functions and rooms.
  • Page 45 SMART VISU SERVER + ASTRO FUNCTION 8 5. Astro function The astro function in SV Home reliably shows you the sunrise and sunset times as well as moon phases and the current sun position. 5.1 Enter location coordinates First, enter the location coordinates (latitude and logitude) of your home system.
  • Page 46 SMART VISU SERVER + ASTRO FUNCTION 9 6. Astro function and actions Using the actions, you can create scenes, and using the astro action type, you can realise automatic processes for the control of your home at sunrise or sunset. You also have the possibility to move the switch-on time or include conditions.
  • Page 47 SMART VISU SERVER + ASTRO FUNCTION 10 6.2 Action “Good evening [Sa – Su]” This action should automatically lower the blinds at the weekend at sunset, put the lighting in the living room into a relaxed ambiance and switch on the outdoor lighting.
  • Page 48 SMART VISU SERVER + ASTRO FUNCTION 11 7. Saving the project Congratulations – you now know how you can set up and use the astro function to automatically and conveniently control your home depending on the sun position using the Smart Visu Server! Before you start the visualisation, do not forget to save your confi guration and activate the password protection again.
  • Page 49 Smart Visu Server How do I set up remote access...
  • Page 50 SMART VISU SERVER + REMOTE ACCESS 2 1. Introduction Convenient and secure remote access: With the remote access of the SV server, you can visualise, control and adapt your home system to your requirements at any time and from any location.
  • Page 51 SV Server can be set up in a few steps. Register at the MyJUNG portal The table here gives an overview of the Purchase remote access for your Smart Visu Server necessary steps. Call Smart Visu Server locally via web browser...
  • Page 52 SMART VISU SERVER + REMOTE ACCESS 4 3. Activation of the remote access using the MyJUNG portal First, open the MyJUNG portal on the JUNG website. Log in to the MyJUNG portal register Select More Information [2] in the as a new user [1].
  • Page 53 SMART VISU SERVER + REMOTE ACCESS 5 3.1 Licence purchase You see the products for which you can purchase additional software or licences in Software Licence Sales. Select the licence purchase for Smart Purchase remote access for 12 or 24...
  • Page 54 SMART VISU SERVER + REMOTE ACCESS 6 4. Activation of the remote access in Smart Visu Server After you have purchased a licence, now activate the remote access on your Smart Visu Server. „ Call the SV Server in the web browser of your terminal device (PC, laptop, tablet).
  • Page 55 SMART VISU SERVER + REMOTE ACCESS 7 4.1 Register device Register your device in the Configuration Management tab. Log in to MyJUNG with your user data for the final activation. Enter your user name and the In MyJUNG, click on the...
  • Page 56 SMART VISU SERVER + REMOTE ACCESS 8 4.2 Activate remote access The activation of remote access is performed in the following steps. Activate the remote access by clicking There you see important information on the Activate Now button [1]. about your MyJUNG remote access [2].
  • Page 57 SMART VISU SERVER + REMOTE ACCESS 9 4.3 Remote access using PC The control of your home system via remote access is secure and platform-independent. The following pages describe how to set up remote access for your SV server with various terminal devices, starting with a PC.
  • Page 58 SMART VISU SERVER + REMOTE ACCESS 10 4.4 Remote access using Android Perform the following steps to set up remote access for your SV server using the Android app. Open the SV Server app and call the Enter your access details for the...
  • Page 59 SMART VISU SERVER + REMOTE ACCESS 11 4.5 Remote access using iOS Perform the following steps to set up remote access for your SV server using the iOS app. On the first start of the app, select the Call the...
  • Page 60 Congratulations – you have successfully set up remote access for your Smart Visu Server. With the SV Server remote access, you now always have your home under control. Your data will be treated securely and confidentially and are subject to the strict European data protection regulations. JUNG expressly declares that personal data will not be passed on to third parties.
  • Page 61 Smart Visu Server How do I set up the presence simulation?
  • Page 62 SMART VISU SERVER + PRESENCE SIMULATION 2 1. Introduction Leave the house for long periods with a secure feeling. Quickly and conveniently set up a presence simulation with your Smart Visu Server for the time during your holiday or any extended absence.
  • Page 63 The presence simulation can be STEP PAGE implemented in your Smart Visu Server Connect the Smart Visu Server to the home network with just a few steps. Make a connection to the KNX bus The table here gives an overview of Set up areas and functions the necessary steps.
  • Page 64 SMART VISU SERVER + PRESENCE SIMULATION 4 3. The Smart Visu Server The Smart Visu (SV) Server gives you the choice between two different areas on the start page: „ SV-Home: operation and visualisation „ SV-Control: editing and setting...
  • Page 65 SMART VISU SERVER + PRESENCE SIMULATION 5 3.1 Functions of the Smart Visu Server On this page you get a short overview of the functions of the SV Server. On the following pages you will find out how to commission the SV Server, to create areas and functions and to create a presence simulation with actions and groups.
  • Page 66 SMART VISU SERVER + PRESENCE SIMULATION 6 4. Commissioning Smart Visu Server Integrate the Smart Visu (SV) Server in your home network. „ Call the SV Server via the web browser of your terminal device (PC, laptop, tablet). To do so, enter the address http://sv-server.local or the IP address of the SV Server allocated by the router.
  • Page 67 SMART VISU SERVER + PRESENCE SIMULATION 7 4.1 KNX – general configuration The individual steps for connecting your KNX system to the Smart Visu Server are explained below. Enter the IP address of the KNX IP Import the KNX group addresses of...
  • Page 68 SMART VISU SERVER + PRESENCE SIMULATION 8 4.2 Areas & functions You can now create and allocate rooms and create functions on the Areas and Functions tab. Note: the following assumes a configured system with functions and rooms already created.
  • Page 69 SMART VISU SERVER + PRESENCE SIMULATION 9 5. Implementing a presence simulation Using the actions, you can create scenes that are called according to time, event or user control. Actions can be combined into a group for a presence simulation and given a trigger time.
  • Page 70 SMART VISU SERVER + PRESENCE SIMULATION 10 5.2 Creating action groups As soon as all actions have been created, allocate the actions to the first action group, Summer holiday. Create the Summer holiday group on Select the activation Switching times [4].
  • Page 71 SMART VISU SERVER + PRESENCE SIMULATION 11 5.3 Duplicate action groups After you have created the presence simulation and action group for the summer holiday, you can now quickly and easily create a second presence simulation for your ski holidays in the winter. In this example, the timer is set to 18:55.
  • Page 72 6. Saving the project Congratulations – you now know how you can quickly and easily create one or more presence simulations with your Smart Visu Server thanks to the action groups! Do not forget to backup your project data and activate the access protection!
  • Page 73 Smart Visu Server How do I connect Amazon Alexa / Google Home?
  • Page 74 SMART VISU SERVER – SMART SPEAKER 2 1. Introduction Using the "JUNG Smart Visu Server" skill for Smart Speaker, such as Ama- COMMUNICATION MODEL zon Alexa and Google Home, you can control all functions and actions cre- ated in the SV-Server in your home via voice command.
  • Page 75 The table on the right gives an over- Activation of the voice control view of the necessary steps. Activation of JUNG Smart Visu Server skill for Amazon Alexa The individual steps are Activation of JUNG Smart Visu Server service for Google Home...
  • Page 76 SMART VISU SERVER – SMART SPEAKER 4 3. Commissioning Smart Visu Server The fi rst step is to install the current software version on your Smart Visu Server. This ensures that all functions of the Smart Visu Server are always available to you. Install the...
  • Page 77 SMART VISU SERVER – SMART SPEAKER 5 4. Activation of the MyJUNG account in the SV-Server After you have registered with MyJUNG, now register the account on your Smart Visu Server. „ Call the SV-Server using the web browser of your terminal device (PC, laptop, tablet).
  • Page 78 SMART VISU SERVER – SMART SPEAKER 6 5. Activation of the voice control Navigate in SV-Control to Areas & Functions to activate the voice function. On the Areas & Functions tab, select Set the slider of the voice control [1] to the function that should be operated "On".
  • Page 79 SMART VISU SERVER – SMART SPEAKER 7 6. Activation of JUNG Smart Visu Server skill for Amazon Alexa Finally, if you use an Amazon Alexa, connect the Smart Visu Server to your MyJUNG account. Search in the Amazon Alexa app...
  • Page 80 SMART VISU SERVER – SMART SPEAKER 8 7. Activation of JUNG Smart Visu Server service for Google Home Finally, if you use a Google Home Smart Speaker, connect the Smart Visu service to your MyJUNG account. In the Google Home...
  • Page 81 SMART VISU SERVER – SMART SPEAKER 9 8. Voice commands After you have completely finished the set-up, you can use the Smart Visu Server in combination with a Smart Speaker. Some possible voice com- mands are listed below as examples.
  • Page 82 Smart Visu Server How do I set up a staircase function?
  • Page 83 SMART VISU SERVER + STAIRCASE FUNCTION 2 1. Introduction You can set the delay time for your staircase light using a staircase func- tion. You only switch the light on and don’t have to worry about switching it off. For example, if you want to fetch your bicycle from the cellar you only have to switch the light on.
  • Page 84 SMART VISU SERVER + STAIRCASE FUNCTION 3 2. Overview You can set the staircase function on STEP PAGE your Smart Visu Server in just a few Create staircase function steps. Set properties for staircase function The table here gives an overview of the necessary steps.
  • Page 85 SMART VISU SERVER + STAIRCASE FUNCTION 4 3. Creating the staircase function You can now create the staircase function in the Areas & Functions tab, and in the next step you can specify the lighting delay time. 3.1 Create staircase function First you create the staircase function.
  • Page 86 SMART VISU SERVER + STAIRCASE FUNCTION 5 3.2 Setting the staircase function properties Now you can specify the properties for the staircase function such as the delay time. First select switch / dimmer and then Specify a description [2]. staircase function for the function...
  • Page 87 SMART VISU SERVER + STAIRCASE FUNCTION 6 4. Completion Congratulations – you now know how to configure the staircase function. You no longer have to switch the staircase light off thanks to the staircase function you have set. Now, if you have no hand free, you don’t have to go back to the light...
  • Page 88 Smart Visu Server How can I set up email messaging?
  • Page 89 Smart Visu Server How can I set up email messaging for a leak?
  • Page 90 COMPONENTS PART NO. QUAN- detect unfavourable conditions (e.g. JUNG TITY if there is a leak, temperature change Smart Visu Server SV SERVER or strong wind) in good time and mini- Leakage sensor LES 01 mise the follow-on damage. KNX pushbutton...
  • Page 91 E-MAIL MESSAGING 4 2. Overview An email message for cases such as STEP PAGE leakage can be set up in just a few Set up email server settings seconds. Create email messaging function The table here gives an overview of Create leakage sensor function the necessary steps.
  • Page 92 E-MAIL MESSAGING 5 3. Set up email server settings First of all you should specify the email server settings for your email provider. Open your system settings in SV In the email server settings tab, you Control using the cogwheel. will find the preset email server settings for several providers under Email server...
  • Page 93 E-MAIL MESSAGING 6 4. Creating the leakage email message Now, in the Areas & Functions tab, you can specify the parameters which would result in an email message if there was a leak. 4.1 Creating the leakage sensor function First you have to create the leakage sensor under Functions. Select the leakage sensor Now select...
  • Page 94 E-MAIL MESSAGING 7 4.2 Creating the email messaging function In the next stage you specify the general settings for the function. After this you will set a few basic settings. Select a zone, for example first floor, Under Functions, select the leakage Now, under Properties, specify a Enter a description[7], e.g.: leakage...
  • Page 95 E-MAIL MESSAGING 8 4.3 Action create email messaging Last of all you create an action which sends you an email message if a leakage is found. In SV Control, go to Actions. Now select an action type [3], in this Create a new leakage email message case event-dependent.
  • Page 96 E-MAIL MESSAGING 9 5. Completion Congratulations – you now know how to configure an email message for a leakage event. Thanks to the leakage sensor and the warning given by the email message you can detect any malfunctions which occur in good time and minimise the damage they cause.
  • Page 97 Smart Visu Server How can I set up email messaging for a temperature limit value?
  • Page 98 QUAN- ents for the email. This enables you to JUNG TITY detect unfavourable conditions (e.g. Smart Visu Server SV SERVER if there is a leak, temperature change KNX universal 2225 WS U or strong wind) in good time and mini- weather station mise the follow-on damage.
  • Page 99 E-MAIL MESSAGING 12 7. Overview An email message for an upper or STEP PAGE lower limit violation for a temperature Set up email server settings limit value you have specified can be set in just a few steps. Create temperature limit value function Create email messaging function The table here gives an overview of Create email messaging action...
  • Page 100 E-MAIL MESSAGING 13 8. Set up email server settings First of all you should specify the email server settings for your email provider. Open your system settings in In the email server settings tab, you SV Control using the cogwheel. will find the preset email server settings for several providers under Email server...
  • Page 101 E-MAIL MESSAGING 14 9. Creating the temperature limit value email message Now you can specify the functions and limit values whose exceedance would result in an email message. 9.1 Creating the temperature limit value function First, under Functions, specify the temperature limit value for whose upper or lower limit violation you will receive an email. Under Functions, select the tempera- Select...
  • Page 102 E-MAIL MESSAGING 15 9.2 Creating the email messaging function The next step, under Functions, is to specify the temperature limit value for whose upper or lower limit violation you will receive an email. Select a zone, for example first floor, Under Functions, select the tempera- Now, under Properties, specify a...
  • Page 103 E-MAIL MESSAGING 16 9.3 Action create email messaging Last of all you create an action which sends you an email message if the temperature limit value you specified above has been fallen below or exceeded. In SV Control, go to Actions. Now select an action type [3], in this...
  • Page 104 E-MAIL MESSAGING 17 10. Completion Congratulations – you now know how to configure an email message for an upper or lower limit violation of a temperature limit value. Thanks to the temperature sensor and the warning given by the email message you can detect any temperature fluctuations which occur in good time and minimise the damage they cause.
  • Page 105 Smart Visu Server How can I set up email messaging for a wind sensor?
  • Page 106 PART NO. QUAN- detect unfavourable conditions (e.g. JUNG TITY if there is a leak, temperature change Smart Visu Server SV SERVER or strong wind) in good time and mini- KNX universal 2225 WS U mise the follow-on damage. weather station...
  • Page 107 E-MAIL MESSAGING 20 12. Overview An email message for the exceedance STEP PAGE of a wind speed limit value you have Set up email server settings specified can be set in just a few steps. Create wind speed limit value function The table here gives an overview of Create email messaging function the necessary steps.
  • Page 108 E-MAIL MESSAGING 21 13. Set up email server settings First of all you should specify the email server settings for your email provider. Open your system settings in In the email server settings tab, you SV Control using the cogwheel. will find the preset email server settings for several providers under Email server...
  • Page 109 E-MAIL MESSAGING 22 14. Creating the wind speed limit value email message Now you can specify the parameters whose exceedance would result in an email message. 14.1 Creating the wind speed limit value function First specify the wind speed limit value for whose exceedance you will receive an email under Functions. Select Display 2-byte (floating point Select...
  • Page 110 E-MAIL MESSAGING 23 14.2 Creating the email messaging function In the next stage you specify the general settings for the function. After this you will write a few basic settings. Select a zone, for example first floor, Under Functions, select the wind Now, under Functions, create the Enter a...
  • Page 111 E-MAIL MESSAGING 24 14.3 Create email messaging action Last of all you create an action which sends you an email message if the windspeed limit value you specified previously has been exceeded. In SV Control, go to Actions. Now select an action type [3], in this Create a new...
  • Page 112 E-MAIL MESSAGING 25 15. Completion Congratulations – you now know how to configure an email message for exceedance of a wind speed limit value. A connected wind sensor can warn you in good time about damage to external facades, to awnings or sunshades in the garden or on the balcony if the wind speed is high (for example at a selected wind speed of 18 m/s or 65 km/h).
  • Page 113 SMART VISU SERVER + PRESENCE SIMULATION 13 Any questions? ALBRECHT JUNG GMBH & CO. KG P.O. Box 1320 We are pleased to help. 58579 Schalksmühle Germany Telephone +49 2355 806-379 Telefax +49 2355 806-365 E-Mail international@jung.de For sale contacts in your country see: jung-group.com/contact...