IP camera : tested Devices
Please note:
Some devices can't be integrated via the function „IP-Camera"! Alternatively the camera can
be integrated by using the function „Website". Furthermore, local IP cameras are not
displayable when using the remote access.
An IP camera can be integrated into the SV server in two different ways.
If the camera has an MJPEG stream, it can be inserted in the function "IP Camera". The
correct URL can be found on the websites of the manufacturers.
If there is no MJPEG stream available for the IP camera, the "Website / IP" function can call
the manufacturer's page with the stream.
SV-SERVER-01 / SV-SERVER-INT
INFORMATION
It´s recommended to integrate a maximum of 4 IP cameras at one
SV- server installation.
If a network camera is integrated with the "IP Camera" function, this results
in a permanent data flow in the home network, independent of the SV
Home call.
If a network camera is integrated with the function "Website", this only
requires a data flow in the home network when calling the assigned SV
Home area.
94 / 157
Need help?
Do you have a question about the Smart Visu Server Series and is the answer not in the manual?