Jung Smart Visu Server Series Product Documentation page 119

Activation remote access in your SV-Server
To enable secure remote access to your SV server, the following final steps are necessary.
(1) Activation of your MyJUNG account in your SV-Server
Switch to any browser of your operating system. In this, call up the start page of the SV server.
To do this, use either "sv-server.local" or the associated IP-Address of your SV server. After
the surface is loaded, please select
Now enter your MyJUNG username (1) and your associated MyJUNG password (2) in the
right-hand column, under the heading "MyJUNG access". Then confirm this step with the
"register device" button (3).
SV-SERVER-01 / SV-SERVER-INT
SV-Control (1).
Abbildung 90: SV-Server start page
Figure 91: Remote access in the SV-Server
1
3
1
2
118 / 157