Up / Down / Stop (State):
The "UP/DOWN/STOP (State)" function (1) is the KNX function for simple control of
motorised drives with feedback objects. The motorised drive can be activated by the group
addresses "Long time" (2) and "Short time" (3).
The "Position feedback" (4) group address must be configured for reading the position. In
addition, the current status of a selectable group address can be polled by defining an
initialisation address (5) on starting the system.
Figure 26: Parameters of the "Up/Down/Stop (State)" function
The function has favorites within the symbol library (6). Additional icons are available via the
"
" button.
KNX function
Selection of the icon library in SV-Control
Up/Down/Stop
(State)
Table 8: Display of the "Up/Down/Stop (State)" function
SV-SERVER-01 / SV-SERVER-INT
6
1
2
3
4
5
Operating and display element in SV-Home
44 / 157
Need help?
Do you have a question about the Smart Visu Server Series and is the answer not in the manual?