6 Maintaining the Smart Visu Server
In case you need support, the Smart Visu Server allows remote maintenance access via
SSH server. This server is exclusively for fault analysis purposes. It allows trained JUNG
personnel to access your server to analyze the device status.
To minimize any possible security risks the remote maintenance access works only in
combination with physical access to the device. You can activate the access by pressing the
button (4) 10 times. The SSH access will automatically be deactivated after 2 hours.
7 Appendix
7.1 Accessories
We recommend using one of the following KNX-IP data interfaces:
-
Jung: KNX IP interface Art. no.: IPS 200 REG
-
Jung: KNX IP router Art. no.: IPR 200 REG
SV-SERVER-01 / SV-SERVER-INT
Figure 117: Smart Visu Server
131 / 157
Need help?
Do you have a question about the Smart Visu Server Series and is the answer not in the manual?