IP camera
The "IP Camera" function (1) can be used to integrate an IP camera in the Smart Visu Server
into selectable areas. This means that it is possible within the user interface of your SV-
Home to, for example, display a live image of your entrance area from an IP camera. Local
IP cameras can not be displayed when using the remote access.
The web / IP address to be displayed can be entered in the "URL" input field (2). If there is
a username and password assigned to the camera it is possible to access the camera
directly by entering http://USERNAME:PASSWORD@url -webcam/ in the input field.
Using the two "Size" input fields (3), you can define the depiction size of the website within
SV-Home in pixels. You can define a reload time in seconds using the "Update interval"
input field (4).
5
1
2
3
4
Figure 62: Parameters of the "IP Camera" function
The "Website" function possesses the following individualisation options within the icon
library (5).
Website
Selection of the icon library in
Operating and display element in SV-Home
/ IP
SV-Control
IP
camera
Table 46: Display of the "IP Camera" function
SV-SERVER-01 / SV-SERVER-INT
93 / 157
Need help?
Do you have a question about the Smart Visu Server Series and is the answer not in the manual?