Table of Contents
Advertisement
Electra Elite
S
5
ECTION
C
ONNECTING AN
A
C
TTENDANT
ONSOLE
M
TO A
ULTILINE
T
ERMINAL
System Hardware Manual
5.
Install the ADA component side down in the multiline terminal
using the provided screw.
6.
Connect external device (e.g., fax, modem, or answering
machine) using the information provided in ETIs.
7.
When installing ADA(2)-W Unit, plug the AC/DC adapter in
the jack on the side of the unit.
8.
Test multiline terminal operation, and then test external
device operation.
An Attendant Console can be attached to a Multiline Terminal using the
following procedures.
1.
Turn the Multiline Terminal and the Attendant Console face down.
2.
Using the joining plate provided with the Attendant Console, attach
the plate to the Multiline Terminal and the Attendant Console.
Figure 9-5 Connecting an Attendant Console to a Multiline Terminal
Attendant
Console
Multiline
Terminal
Issue 6
9 - 5
Advertisement
Table of Contents
