Figure 7-58 Installed Wall Mount Unit; Installing The Wall Mount Unit And Mounting The Multiline Terminal Using The Wmu-U Unit - NEC ElectraElite 48 System Hardware Manual

Table of Contents

Advertisement

Issue 6
7 - 44
10.
When properly installed, the wall-mounted Multiline
Terminal looks similar to the one shown in
7-58 Installed Wall Mount
Do not adjust the tilt panel after the Multiline
Terminal is mounted on the wall.
3.12.3
Installing the Wall Mount Unit and Mounting the Multiline
Terminal Using the WMU-U Unit
When installing any adapter unit, a separate WMU-U Unit
must be purchased to accommodate this unit.
1.
Remove the line cord, base plate and base cover
from the Multiline Terminal as shown in
Preparing Multiline Terminal for Adapter Installation
in the previous section.
2.
Cut off the tabs on the adapter as shown in
7-59 Removing the Tabs from the
Unit.

Figure 7-58 Installed Wall Mount Unit

Installing Optional Equipment
Electra Elite
Figure
Section 2
Figure
Adapter.

Advertisement

Table of Contents
loading

Table of Contents