Dtp-1Hm-1 Or Dtp-1Hm-2 Tel; Figure 6-10 Dtp-1Hm-1(Wh) Tel Single Line Telephone - NEC ElectraElite 48 System Hardware Manual

Issue 6
6 - 10
3.2

DTP-1HM-1 or DTP-1HM-2 TEL

The Single Line Telephone is a fully modular terminal with a flash
key, redial key, 3-level receive volume control, 2-level ring volume
control, data jack, message waiting lamp, and eight programmable
Feature Access/Speed Dial keys. Each terminal requires an
SLT(1)-U( ) ADP or SLI(4)/(8)-U( ) ETU.
A maximum of 24 DTP-1HM-1 or DTP-1HM-2 TELs can be
installed in an Electra Elite 48 system.

Figure 6-10 DTP-1HM-1(WH) TEL Single Line Telephone

The H switch setting for the receive volume control should only be
used by hearing impaired individuals, otherwise hearing damage
may occur.
Compatible) volume control defined by section 68.317 of the FCC
Rules and Regulations, 1996 edition.
The H switch setting for the receive volume control should only be
used by hearing impaired individuals, otherwise hearing damage
may occur.
Compatible) volume control defined by section 68.317 of the FCC
Rules and Regulations, 1996 edition.
This telephone complies with HAC (Hearing Aid
This telephone complies with HAC (Hearing Aid
Installing Electra Elite Multiline Terminals
Electra Elite