Selecting An Installation Location - NEC ElectraElite 48 System Hardware Manual

Electra Elite
S 11
ECTION
term
I D
NSTALLING
H C
ANDSET ORDLESS
T
ERMINAL
System Hardware Manual
®
11.1

Selecting an Installation Location

Select a location for the DTP-16HC-1 TEL to avoid excessive heat
or humidity. The base unit should be placed on a desk or tabletop
near a standard 120 Vac outlet and within reach of the telephone
line connection on the Electra Elite Multiline Terminal. Keep the
base unit and the handset away from sources of electrical noise
(e.g., fluorescent lighting).
11.2 Connecting the Telephone Cord
The Base Unit of the DTP-16HC-1 Tel has two jacks on the back:
LINE and DC24V.
Using the telephone line cord supplied with the terminal, connect
the LINE jack to the telephone line.
Observe the
installation.
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
Use caution when installing or modifying telephone lines.
following warnings
Issue 6
during
6 - 23