Electra Elite
System Hardware Manual
Figure 7-33 Removing Cutout
2.
Remove display plate from DBM(B/E) and DBM(E),
and peel off the cover sheet on both.
3.
Insert protruding side of cable from the DBM(E) in
DBM(B) CN7 or in CN7 of the previous DBM(E).
4.
Slide the bracket on DBM(E) being installed into the
groves on DBM(B)/(E), and tighten the nuts and
bolts. Refer to
Figure 7-34 Connecting the
Figure 7-34 Connecting the Bracket
Issue 6
Bracket.
7 - 27