Table of Contents
Advertisement
Issue 6
6 - 24
11.3
Applying Power to the Base Unit
1.
Power to charge the battery is supplied from the Telephone
line.
2.
An ACA-U Unit must be installed in the optional DC24V jack
on the Base Unit to provide power for the D
Cordless terminal.
3.
Plug the ACA-U Unit into a standard 120 Vac wall outlet.
4.
The power level between the Handset and the Base is
10mW.
5.
When the ACA-U Unit is used, route the power cord where it
does not create a trip hazard or where it could become
chafed and create a fire or electrical hazard.
6.
An ACA-U Unit is required for this terminal to operate
properly.
term
Figure 6-27 D
Handset Cordless Terminal
Installing Electra Elite Multiline Terminals
Electra Elite
term
Handset
Advertisement
Table of Contents
