Switch Settings; Table 5-1 Mbd-U10 Unit Default Switch Settings - NEC ElectraElite 48 System Hardware Manual

Issue 6
5 - 8
3.3.2

Switch Settings

Refer to Table 5-1 MBD-U10 Unit Default Switch

Table 5-1 MBD-U10 Unit Default Switch Settings

SW1-1
Off
On
Off
On
SW1-3
Off
On
SW2
Momentary Switch
SW3-1
On
Off
SW3-2
N/A
Pressing SW2 interrupts all service and
Pressing SW2 interrupts all service and
causes a second initialization. Do not use
causes a second initialization. This
this switch in an operating system unless
switch should not be used in an
absolutely necessary.
SW1-2
Off Normal Operation
Off Flash ROM load from COM1 port
On Factory Test
On Flash ROM load from EPROM
Description
MF Mode
KF Mode
Description
System boot by EPROM
System boot by Flash ROM
Description
Not Used
Installing Electronic Telephone Units
Electra Elite
Settings.
Description
Description
CPU Reset