Connecting The Telephone Cords - NEC ElectraElite 48 System Hardware Manual

Electra Elite
System Hardware Manual
10.2

Connecting the Telephone Cords

term
The D Cordless Lite or Cordless II terminal is connected to the
telephone line and to the host telephone using two telephone line
jacks on the back of the Base Unit: LINE IN and LINE OUT.
Never install telephone wiring during a lightning storm.
Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
Use caution when installing or modifying telephone lines.
1. Unplug the telephone line cord from the host telephone, and
connect it to the LINE IN jack.
term
Figure 6-25 D
Observe the following
installation.
Issue 6
Cordless II
warnings during
6 - 21