Electra Elite
Reset Power Switch SI
DIP Switch S2
DIP SW 1
DIP SW 2
ON
ON
ON
ON
SHUT DOWN Switch S3
RUN Position
SHUT DOWN Position
System Hardware Manual
Table 5-38 Switch Settings for EliteMail VMS/FMS/CMS-U30 ETU
DIP SW 3
DIP SW 4
ON
ON
ON
ON
ON
5.6.6
Table 5-39 Jumper Settings
J1 (only used on the FMS/CMS ETU)
1 - 2
2 - 3
J7 (only used on the VMS ETU)
1 - 2
2 - 3
Used for development only.
Enable HostKey and run Manufacturing Test (NEC Production use
only)
Enable HostKey with floppy disk redirection and run Manufactur-
ing Test (NEC Production use only)
Connect to CoSession using modem instead of direct cable con-
nection
Start BRU Host with direct cable connection
Start BRU Host with modem connection
Connect to CoSession using direct cable connection, but do not
start the voice mail software (for troubleshooting and maintenance
only)
Used to identify the position of SW3
LED 6 is on Red
LED 7 is on Red
Jumper Settings
Refer to
Table 5-39 Jumper Settings
No external modem connected (default)
External modem connected
Compact Flash is master drive
HDD is master drive (default)
Description
Issue 6
5 - 79